Bathroom. Tuesday , July 18th , 2017 - 15:21:28 PM
It’s also important to take into consideration your own specific needs and preferences. Maybe you want to add something to the bathroom that isn’t necessarily a must-have for this room or maybe you want to opt for something a bit more unconventional but that better suits you.
If your shelf is a solid wood board, you might be perfectly fine with the edges as they are. However, if you’ve chosen plywood as your shelf medium, you will need to trim out the edge. Grab some L-shaped corner trim, making sure that the inner depth is enough to cover the thickness of your shelf.
Screw on all four female couplers to the four mixing valve threads. Determine whether or not you will be raising your mixing valve. Technically, this can be positioned as high up on the wall as you want it. For a shower alone, you would obviously want the mixing valve to be much higher than for a tub/shower combination because it doesn’t need to be accessed for bathtub use. Hold the mixing valve into place where you want it and mark the nearest stud at the vertical center of the valve. Measure the vertical distance from the old mixing valve to the new position; you will need to cut two pipes this length to raise the cold and hot water pipes to this height. Also, measure the new distance from the bottom female coupler on your mixing valve to the horizontal pipe connecting the tub faucet.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does artforcritters.net claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.